2009 Aprilia RSV4 uncovered at last, has crazy triple headlight

Dailies -

By

2009_Aprilia_RSV4_Factory.jpgThis is the first shot of the road-going 2009 Aprilia RSV4. Taken on a camera phone at the official unveiling in Rome, it shows for the first time what the Aprilia RSV4 you’ll be able to buy will look like. And man does the 1000cc V4 SBK homologation-special look cool.

Update: Information on the weight, specifications, chassis and the planned Tuono-style naked version follows the jump.

Update 2: Thanks to our buddy Ivar at MC24, we can bring you the official shot of the 2009 Aprilia RSV4 Factory (seen above) and a new shot of the RSV4 Superbike competitor after the jump. Man, this thing is tiny.

Update 3: Check out all the Aprilia RSV4 Factory photos here.

Update 4: The official press release follows the jump.
>2009_Aprilia_RSV4_race.jpgThe 2009 Aprilia RSV4 will be available as both a standard model and a fancy Factory version. The latter will feature uprated suspension and brakes, but both models weigh in at 190kg (wet) feature engine mounts that adjust 10mm up and down, an adjustable swingarm pivot, and a changeable headstock angle. No info on power yet, but the race version makes 210bhp at the crank, so we’d expect 190bhp-ish on the road-going version.

According to Miguel Galluzzi, the RSV4′s designer, there’s also a Tuono-style naked version planned for the near future.

The first thing you’ll notice is the bizarre, and quite frankly ugly,
triple headlight arrangement. Where you’d usually find a center-mounted
air intake, there’s instead a big, honkin’ central headlight equipped
with what appears to be LEDs. More traditional and more attractive main
beams supplement this central headlight. Underneath those lights you’ll
find the air intakes.

2009_Aprilia_RSV_4.jpg
Also apparent is the use of the same USD Öhlins forks and radial Brembo
monoblock calipers as the RSV 1000 R Factory. We’re kinda disappointed
that Aprilia didn’t go with the more exotic FGR 800 SBK-spec forks (as
used on the rival 2009 BMW S1000RR), but this decision points to the
RSV 4 being priced in the more attainable $20,000 range.

We also like the crazy finned tailpiece, which points the RSV4 being a
single seater. Although it is possible that it will use an RSV-style
removable pillion pad.

We still don’t know official power, weight and other figures, but we’ll hopefully be able to bring you those tomorrow morning.

The official press release follows, although there’s not many more details in it:

A revolutionary design project has led to a truly unique motorcycle and Aprilia’s return to the Superbike World Championship.

With 31 world championship titles, 250 MotoGP wins and 8 Superbike victories in the last sixteen years, Aprilia is a legend in modern motorcycling. Aprilia motorcycles have dominated circuits all over the world thanks to unconventional technical solutions, experimentation and innovation and, sometimes, by revolutionising technology thought to be unchangeable.
With this unique sporting heritage behind them, Aprilia is proud to present the RSV4, the bike with which Aprilia will return to the Superbike World Championship in 2009. This extraordinary machine has been conceived, designed and developed entirely by Aprilia Racing for competition use.

The RSV4 will make its debut in the 2009 Superbike World Championship. With four cylinders, 999 cc and top of the class power in the race-ready version, this revolutionary machine is packed with innovative design and manufacturing solutions of the sort we have come to expect from Aprilia. A V-four engine with total electronic management, and an exceptionally light and compact chassis are just some of the features that make this bike unique in the world of motorcycling. The revolutionary design of the Aprilia RSV4 comes directly from Europe’s biggest and most successful racing team.

The road-going version of the RSV4 also benefits from the extraordinary technical know-how that Aprilia Racing has accumulated over two decades of success in MotoGP, and is packed with advanced solutions from GP racing. In short, the RSV4 stands alone as a exclusive, genuine, and in many ways unique racing replica.

The Aprilia RSV4 is powered by the most revolutionary and most powerful engine ever developed by Aprilia. This 65° V four unit is based on an architecture that is unique in the world of supersport motorcycles, and features refined engineering combined with prestigious materials and advanced electronic management solutions.
The new engine uses multi-mapping ride-by-wire technology, a solution that opens up new horizons in engine control, and offers virtually infinite opportunities for power delivery and traction control (present as standard on the racing version).

The choice of a narrow V layout has led to the development of an incredibly narrow engine. This in turn has permitted weight to be centralised and chassis performance dramatically improved (thanks to a short wheelbase and long swingarm). The narrow V-four configuration permits a longer stroke to be used, with clear benefits in terms of improved engine breathing. High engine speeds can therefore be reached without having to extend the width of the crankcase. This is fundamentally important to aerodynamics and manoeuvrability (two characteristics for which Aprilia motorcycles have always been universally acclaimed).

The monobloc cylinder block features integrated liners for maximum rigidity and consistent efficiency. The air intake trumpets are variable in length.  Each bank of cylinders has a servomotor dedicated exclusively to the operation of their two throttle bodies. The aperture of the four butterfly valves, and therefore the volume of air inducted, can therefore be controlled independently. This solution opens up new horizons in electronic engine and power management, resulting in truly advanced integral traction control. A cassette type gearbox and a slipper clutch demonstrate the racing character of this engine.

The Aprilia RSV4 has been designed and developed with competition in mind, and naturally offers all the adjustments normally found on racing machines. In particular, this most powerful Aprilia ever made stands out for its complete range of chassis adjustments. The variable geometry frame not only allows you to change parameters like headstock angle (thanks to interchangeable steering bushings), but even lets you adjust swingarm and engine position. Racing technology has been used for all aspects of construction. The RSV4’s aluminium frame and swingarm are constructed from a clever mix of thick-walled parts and variable section sheet.

All components are naturally of the highest calibre. They include an Öhlins fork, rear monoshock and steering damper, Brembo monobloc brake calipers and forged aluminium wheels.

The styling of the Aprilia RSV4 has followed the same approach as the rest of the design. The RSV4’s racing character is clear from every component, and from the absence of solutions chosen only for appearances. As a result the overall design of the RSV4 and the advanced technology of its component parts merge into a uniquely harmonious whole that is superbly functional on the racetrack – the natural habitat of this latest Aprilia.
The fairing has been developed in the wind tunnel. Minimal in size, it in no way detracts from the stunning technology of the engine. The frame/engine system is fully visible and bulges like muscles beyond the fairing.

The triple headlight cluster makes the RSV4 instantly recognisable and unique from the very first glance.
The superbly lightweight tail slopes upwards to emphasise the dynamic nature of the Aprilia RSV4. Even when stationary, the bike simply exudes a desire for speed and competition.
 

  • Clive

    Oh my god, I need to start saving. No 1198 for me.

  • Highway9Rider

    DEAR LORD BABY JESUS I want to thank you for this beautiful bike!!!!

  • Kevin White

    Bring on the Tuono. This thing is pretty lean. No fat on the bones. I like it.

    Being a single seater seems natural to me. I don’t really understand why every 600 and liter bike from Japan is set up as a two seater (or is that more of a 1+1).

  • ep

    should whip everything on the track easily.

    but Ducati will have another banner year in the showrooms, taking down Aprilia and KTM unless they can get this thing down to a reasonable price i.e. no higher than 16k.

  • Antoine Godchaux

    Me want Tuono Factory version.

  • Anthony Rutland

    Front end needs to be black to mask the ugly inner headlight. Also, I would have like to see the frame painted black. Looks unfinished. I’ll give it a year or two before I go trading in my RSV Factory. I care not to be the first year guinea pig.

  • contender

    Whoa, a jalop redirect!

  • Aprilia Falco

    I find it, quite frankly, absurd that the article declares the headlights ugly before the public really even gets to know the bike for themselves. I for one think it looks bad friggen ace… and I’m certain it is.

  • spee-d

    Well this just made my decision. I just totaled my new cbr1k. woohoo!! it made it four months! Damn cage took me out. So, as I am sitting at home healing, I was trying to decide what to get, another 08 cbr, a 1098s, or the 09 R1. Was thinking about a rsv factory, then found that the rsv4 was for real and saw this article. Decision made, money is waiting to be spent.
    I think the headlights look great and will probably throw light better then any other bike out there. I do like to see at night.
    Just hope they put a seat on back for my wife, or she’ll just have to learn to ride her own!!

  • dean sl1000r

    looks like my SL1000R, same colour scheme just a LOT meaner. hope they bring out in dual seat, 21 litre tank, cruise control. like to use bike for everything, track and touring down to philip island, and of course endless wheelies.

  • http://poppy vincent salvador

    what is 190 kilo i dont have my conversion chart with me.used to have a 1985 vfr i hope this is in the same vein. i like 3 headlights keeps the deer in sight.when does it come stateside.is it me only or am i a sucker for every new bike that comes along.

  • Moses

    Is it me, or does this bike look massively similar to the new Honda sportbike? the exhaust and tail behind the seat look similar…any thoughts on this?

  • yones

    is that a CBR 1000 RR.. eeewww same flat nose and ugly tail. looks lean but hey stil not a ducati 1198, gosh what a beaquty!!! (btw i own a gixxer 1000, but i rode the new 1198s last week, good lorg, it is like a mad bat out of hell.. very uncomfortable but torque king and yesss corneers are piece of cake.. I want one but cant afford now :)

  • jayjay

    i totally agree looks massively like a 1000 rr which has a ugly nose and tail…1198s a special unique bike and pricey… i love my R1

  • mama

    yeh its not an 1198 thank god ! Aprilia has has bullet proof motors since 1999

  • http://article.officecarpetreplacement.co.uk/archives/134 Richard Edward Bridging

    What’s the difference between a g-spot and a golf ball? A man will spend 20 minutes looking for a golf ball